Plate Chain Bucket Elevator
Plate chain bucket elevator takes steel chain as the traction member. Bucket adopts intensive and large-capacity arrangement, and it adopts inflow feeding and gravity-induced or centrifugal gravity-induced discharging methods. This kind of elevator runs smoothly and is suitable for lifting powdery, granular and nubby materials.
Introduction
NE series bucket elevator is composed of running parts, driving device, upper device, middle housing and lower device. Running parts consist of bucket and special chain. Bucket is wear-resistant bucket with high filling rate. Chain is alloy steel wear - resistant sleeve roller chain. The pin shaft is fixed with the outer chain plate, and the sleeve is fixed with the inner chain plate, which can effectively reduce the wear of bearing parts. The drive device is a variety of drive combinations, and the drive platform is equipped with maintenance racks and railings. The driving device is divided into left installation and right installation. According to the special requirements of the owner, to select designated brand of motor, reducer, bearing and other external parts, and respond to the power supply voltage frequency requirements of the owner. For specific projects, Beumer and Aumund products can also be used.
Request a Quote
Get Your Custom Solution
Interested in this solution? Get a free consultation and project assessment. Our engineers will respond within 24 hours.